Securing large industrial sites is a top priority. The supply of lighting and monitoring equipment is made possible through the use of AUGIER energy transport solutions. These systems can, for example, provide power for: emergency lighting, isolated buildings, pumps, gates, and measuring devices.
Most French nuclear power plants use AUGIER HTI (Intermediate High Voltage) distribution equipment.
Power Supply for Remote Loads
The combination of a step-up substation and a step-down substation makes it possible to supply power to locations far from low-voltage sources, such as:
- Remote buildings,
- Borehole pumps,
- Motorized gates,
- Lift pumps.
Lighting Power Supply
The combination of a LV/HVI step-up transformer substation with several watertight transformer substations installed in underground chambers enables the power supply of lighting systems such as:
- Lighting for fences and monitored areas,
- Roadway lighting,
- Parking area lighting,
- Construction site lighting.
AUGIER Solutions Also Provide Power For:
Highly secure power supply for radiation measurement sensors (KRS loop) through the implementation of a 5500 V AUGIER network, serving as backup to the 20 kV network.
The objective is to ensure effective security through the use of a different technology.
Power Supply During Reactor Shutdowns
Mobile transformer substations (DNX) rated at 200 kVA and 400 kVA, 6,600 V / 400 V, combined with an on-load switch (wall-mounted cabinet), form the 6.6 kV loop supplying the energy required for maintenance operations when a reactor unit is shut down for several months.
Major References
- Hydroelectric power plant: supply of remote pumps,
- Nuclear power plant emergency lighting: supply of perimeter fence lighting,
- Reactor shutdown power supply: maintenance operations using the 6,600 V loop of a nuclear power plant,
- Dam valve head power supply: supply of pumps located 4,200 metres away.
These Power Plants Use Our Solutions
Golfech, Paluel, Saint-Alban, Chooz, Cattenom, Flamanville, Nogent-sur-Seine, Le Blayais, Civaux, Cordemais, Penly.
Contact Our Experts
We will carry out a free and personalised study and provide the most suitable and cost-effective solution to meet your requirements.
Request a study → contact@augier.com
PRODUCTS FOR Power Stations
IMPLEMENTED IN Power Stations
Discover our references around the world using AUGIER technologies.
Maintenance of a nuclear site
Project features TOTAL POWER: 200 kVA or 400 kVA TRANSPORT VOLTAGE: 6,600 V NETWORK LENGTH: According to the 6,600 V loop of each nuclear power plant LOCATION: France YEAR: For over 30 years to the present day PROJECT OBJECTIVES To supply electrical equipment for...
Securing a nuclear site
Project features TOTAL POWER: 2×50 kVA — 2 substations TRANSPORT VOLTAGE: 3,200 V single phase NETWORK LENGTH: 2,500 meters LOCATION: France YEAR: 2021 & 2026 PROJECT OBJECTIVES The security fence lighting system uses light points distributed over 2,500...
Powering Kerian Hydro Hydroelectric Power Station pumps, Malaysia
Project feautures TOTAL POWER: 64 kVA TRANSPORT VOLTAGE: 3200 V NETWORK DISTANCE: 5 KM LOCATION: Perak, Malaysia YEAR: 2016 PROJECT OBJECTIVES Supplying power to pumps in a hydroelectric power station over a distance of 3km. CUSTOMER NEEDS Site with difficult...