SCS series selectors are up-to-date circuits selectors designed to feed up to 6 airfield lighting loops from one constant current regulator. They are fitted with a simplified electronic enable to communicate with latest generation supervision systems, allowing a very fast and simple commissioning.
Benefits Stand alone Circuit Selector
The circuit selector is provided as a stand alone cabinet, that can be wall mounted.
Access to screw terminals is granted through a front door fitted with a key lock.
The selector is provided with high tension relays, and can accept serial communication means (Jbus, Ethernet, …) single or dual, in order to ease its parameter setting as well as remote control operation.
The user interface is located on the front panel, and enable direct feedback of each circuit status as well as inrush current presence on the lighting loops.
A rotative switch can be used for local control or to enable automatic operations.
Safety of operations
Zero current switching is achieved by mean of an interlock connection, that can be installed with the constant current regulator (refer to CCR manufacturer manual). The final status for each circuit is thus either a short circuit or a full load, switching occurring without possible damage to the light bulbs.
The front door is also fitted with a door switch, is order to grant a power shut down while accessing the inside components of the cabinet.
Specifications Stand alone Circuit Selector
- OACI Aerodrome design manual, part5
- IEC - CCR's standard 61822
- FAA - AC150/5345-5 -- L847
Features Stand alone Circuit Selector
Amount of ways
up to 6
depending on CCR rating, and according to standards IEC (2xUn + 2500 Vca) or FAA (5xUn).
230V / 400V
H700mm, L500mm, P300mm (2 ways model)
-20°C to +55°C (IEC) or -40°C to +55°C (FAA)
Max. humidity : 95%
- Natural air cooling
Optional Functions Stand alone Circuit Selector
Upon request, the selector may be fitted with the following options:
> Output lightning arrestors
> Input lightning arrestors
> Circuit breaker
Standards met, our commitment
Technical Documentation Stand alone Circuit Selector
at your service
we are you
support in your project
AUGIER Energy helps you in the study of your project as close as possible to your needs in order to offer you the best technical and economic solution
Our field of work Stand alone Circuit Selector
- Infrastructures Routes
- Rails Infrastructure
- Tunnels Infrastructure
- Bridge Infrastructure
- Port Infrastructures
- Oil & Gas
- Military Sites
- Power Plants
- Recreational Sites
- Industrial Sites
- Remote Locations
Implemented Stand alone Circuit Selector
Here, in this case in the application domain :
Discover our references around the world using AUGIER technologies
Other products relative
from the category : Products
Discover the AUGIER technologies used all over the world for more than 60 years